Worx-tools WU601.1 User Manual download pdf (Page 10)

Router ENG

SYMBOLS OPERATING

INSTRUCTIONS

1. INSERT THE ROUTER BIT

Router Bit Selection

Depending on processing and application,

router bits are available in many different

designs and qualities:

Router bits made of high-speed steel

(HSS) is suitable for the machining of soft

materials, e. g. softwood and plastic.

Carbide tipped router bits (HM) is particularly

suitable for hard and abrasive materials, e. g.

hard wood and aluminum.

Use only routing tools with an

allowable speed matching at least

the highest no load speed of the machine.

The shank diameter of the router bit must

correspond with the rated diameter of the

collet.

Inserting Router Bits (See A)

Before any work on the machine

itself, disconnect the mains plug. It is

recommended to wear protective gloves

when inserting or replacing router bits.

Press spindle lock button (14) and keep

depressed. If required, turn the spindle by hand

until the lock engages.

Press the spindle lock button only when at a

standstill.

Insert router bit. The shank of the router bit must

be inserted at least 20 mm (shank length).

Tighten the tightening nut (13) with the spanner

(19) (size 22 mm). Release the spindle lock

button.

Do not tighten the tightening nut

of the collet without a router bit

inserted.

2. MOUNTING THE EXTRACTION ADAPTER

(See B)

To connect the vacuum cleaner via a suction

hose, you must fasten dust adapter (20) to base

plate (10) with both knurled screws (25).

When mounting the extraction

adapter, ensure correct mounting

position!

• For dust extraction, the vacuum hose can be

connected directly to the extraction adapter.

• Clean the dust adapter (20) regularly to

ensure optimum dust extraction at all

times.

• The vacuum cleaner must be suitable for the

material to be worked.

Read the manual

Warning

Wear eye protection

Double insulation

Wear ear protection

Wear dust mask

1110

UKR-WU600 WU600.1 WU601 WU601.1-M-060726.indd 10 2006-7-26 14:08:53

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 25 26

Comments to this Manuals

No comments